Questions & Answers for: overlocker rolled hem

...rolled hem on my Janome Mylock 234D overlocker (it's old). Can you advise settings please? I have the plate for the rolled hem, I have taken out one of the needles and have it set on "R" on the side ...

...rolled hem on a domestic overlocker onto anything heavier than damask so you may find that you need to find another edge finish solution for your project if you just can't get it looking good ...

...mode & I have forgotten how to change to rolling hem mode http://content.janome.com/userfiles/file/inst%20book%20634D.pdf Change the needle plate setting knob to rolled hem, starting on p. ...

Bernette Overlocker MO 234 roll hemming attachment I need the roll hemming attachment for a Bernette Overlocker MO-234 Bernette/Bernina Dealer will order for you

...overlocker/serger machine you are using? if the fabric is catching on the overlocking tongue it could be a number of factors, have you lifted the top cutting blade out of the way and forgot to put it ...

...rolled hem on an old Elnalock overlocker? I have lost the manual for my old overlocker. For many years I have only used it for finishing seams, but it still sews beautifully after 30+ years. Can you ...

...it... Sew Inspired Serger Rolled Hem Tips In case you don't have a manual, you may be able to glean some information here: Sergers Overlockers need manual for the Bernina Bernette 203 overlocker

...rolled hem with a Juki MO 2366 N? The plan is to sew on chiffon fabric, and having a nice rolled hem. Most likely. Most overlockers can make a rolled hem. You will probably want to do a lot of ...

...overlocker, the rolled hem may be achieved by either guiding the cut edge of the fabric so it slides right along the cutting blade, or, by cutting off some fabric and using this fresh cut edge on ...

...overlocker rolled hem. ...