Questions & Answers for: oven stay preheat

oven will not stay on I am able to preheat my oven but then once it is pre-heated it will turn off within a couple of minutes. The red at the bottom stays bright. Any suggestions on what to do to fix ...

preheat oven stays on and oven will not preheat Hi, If your electric oven is not heating then you probably have a bad heating element in your oven. This is not that hard to fix yourself... Check out ...

preheat and then oven temperature goes up to 600 degrees by itself. Please help need to check oven sensor probe located inside of oven will be in left or right hand corner. the tech sheet should still

Preheat not working in oven this stove is about 35 years, works good but the lower element went so I installed another but the preheat won't work and the element stays on totally. Kenmore Deluxe Self ...

...preheat, oven clicks, turns off and does not come back on. Clicking sound keeps going but nothing happens. This clicking sound.. If it is coming from the control panel area could be indicative of a ...

oven takes long time to preheat whirlpool model SB160PEE gas wall oven, takes about an hour to preheat. i can hear the gas cycle on and off every few seconds. if the oven has a glow bar it,s not ...

...stay on about 3 min. then shut the oven off and f1 code appears f1 code appears when the preheat cycle is complete and main burner fires up for about 3 min. Clean the flame sensor and check the gas ...

...oven lights runs for 10-15 sec beeps preheat light goes off and flame goes out I had to replace my igniter to get mine to work. I did it myself for $65.00 Mine the gas just would not stay on to heat ...

Oven won't go from preheat to temp. Smell of gas present Oven worked fine yesterday but today it just stays on preheat if you can smell gas , turn it all of at the tap and get in a gas professional to

Preheating light and bake element issues my oven preheating light stays on (although not heating) & I the bake element broke 3 months ago. ( I replaced the bake element with a non GE part and it broke