Questions & Answers for: Candy oven

Candy F254/3X single fan oven, grill works, oven doesn't. The oven worked Sunday afternoon, then not sunday night. The fan works but the oven does not heat up. If fan is working o/k, then you need to ...

the fan in my oven is blowing out cold air and while the convention oven is working- it takes a long time to heat up and doesnt cook food as well as the fan assist You will need to replace the fan ...

fdp 231 tcp 21 The bottom oven the fan is working but the oven does not get warm It is likely to be the oven element that is faulty, if the fan is working o/k, then replacing the element should solve ...

Oven blowing out cold air I have a candy fan assisted oven it's blowing out cold air and not getting hot what is wrong with it. You need to replace the oven element This is located at thr rear of the ...

oven not heating but fan working You need to replace the oven element. This is located at the rear of the oven compartment Candy Oven not heating? How to replace a Candy fan oven element This video ...

when i switch the oven on the oven trips the main circuit. the oven used to work normal then it started to trip out after it had been on for a long period. you could leeave it off for 10 mins then it ...

CANDY OVEN Hi, i have candy oven which stop heating up even if it switched on for 10 min still cold, though fan & oven light works. It will be the oven element that has failed, you need to fit a ...

oven not heating up Hello, the main problem I find with this fault is the fan element has blown. This usually cannot be seen without taking the fan cover off inside the oven. Thanks. Candy Oven not ...

can you replace oven element, cannot see any screws in oven to remove plate to gain access You will have to remove the oven from the housing, and then remove the rear cover of oven, and gain access to

Candy Built in double fan oven bottom oven not getting hot the bottom oven of the built in fan oven will not get hot top oven works correctly Cheak the coils. Do a continuity test also look for signs ...