...output speed sensor. This might also be the cause of sending wrong info to the computer. Another one might be the O2 sensor thought i think this might be unlikely. I hope this was helpful. Good
...output speed sensor, no fix, then the input sensor. Both located under air filter box. Easier to get to all the screws if you remove the battery. Input sensor is facing forward towards the frond end. ...
...output speed sensors on the transmission. I just need to know for sure instead of throwing parts at it. I've read plenty of threads on the forums using 1191 and 1193 as keywords, but people either ...
...output speed sensors on the transmission. Simple exterior sensor replacement. Good luck sounds like real low on transmition fluid and you need to replace trany filter always start with cheapest and ...
...speed sensor is on the transmission. It is under the air cleaner box. The input and output sensors are located there too. They are attached by one bolt each and one electrical connection. The input ...
...mode or like yesteday it went into limp mode WHILE i was driving it. The revs are up and down the bloody car is possessed!! replace both input and output speed sensors and she will run like a ...
Question about 2001 XG300
...P1632 have replaced the input and output sensors and one of the abs wheel speed sensors. Trans is starting in 2nd gear... limp mode P1632 is for the transmission computer. The code says TCS ...
Usually answered in minutes!
506 Questions
21 Questions
