Questions & Answers for: ore

transmission line leak cant get the line to stop leaking do the lines have 2 orings and one spacer on each line Buy the kits from the dealer, lube them with oil and push into the tranny end. Make sure

how do i get to feul injectors how do i get to fuel injectors YOU HAVE TO RELIEVE FUEL SYSTEM PRESSURE.REMOVE THE INTAKE MANIFOLD COLLECTOR.REMOVE VACUUM HOSE FROM THE FUEL PRESSURE REGULATOR.REMOVE ...

air leek where nails come out Air leaking  out the nose indicates that the orings  that seal the bulkhead /cylinder spacer (white plastic ring around the cylinder) are leaking. Order ...

my BN200 nailer has a crimped Oring. After firing once it stratd blowing air out the back port. I toke it apart a reajusted the Oring. after firing once it started blowing air out he back port again. ...

air leaks out where nail comes out , dewalt air hammer Dewalt nailers have some orings made of vinyl in critical sealing areas that failed due to oil/water in the supply air. One indication of failed ...

sns 41 as soon as i connect air hose, driver goes down and air comes out exhaust May need cylinder seal # bc0438. When this seal fits loose or is cracked, air will leak past and push piston down to ...

D51850 framing nailer leaks air continuous air flow from the front Dewalt uses vinyl looking orings that begin to just melt, unlike the black rubber orings. I usually replace about four orings ...

D51822 plunger will fire (and impact wood) but will not retract enough to grab/push out a nail. Dewalt nailers have some vinyl orings that fail. Usually found within the trigger valve, headvalve, and ...

I purchased a kit from professor foam on ebay and installed it. The nail gun is still shooting air out of the tip where the nails come out. Dewalt D5188 type 1 I did find one shredded o-ring when I ...

My Dewalt D51825 leaks air from the piston rod. Bumper seems to be okay Can any one help? Air leaking from nose of gun indicates air getting past bulkhead orings. Bulkhead is white plastic frame ...