Questions & Answers for: orbital sander problems

Question about Porter Cable Tools & Hardware - Others

1 Answer

i have a porter cable 5" r.o.s. that is not orbiting. what is the most common resolution to this problem? random orbit sander 333-5" motor runs but the disk dose not turn Hi, The main drive belt broke

Ad

Question about 332K Quicksand Random Orbit Sander W/ Case

2 Answers

...Orbital Sander rotates but does not "orbit" My Porter Cable Random Orbital Sander model 333 pad rotates at a high speed but does not appear to randomly "orbit". This results in immediate circular ...

Ad

Question about 332K Quicksand Random Orbit Sander W/ Case

2 Answers

...orbital sander is like, then went to a craft store and bought a large sheet/pad of velcro and cut it to fit the 6" rubber disc pad glued it to the pad and then bought hook and loop sanding discs. And ...

Question about 3725 Devs, 5" Random Orbit Sander, 3.3A, Variable Speed

1 Answer

3725Bosch 5" random orbit sander, loss of power!! When i turn on my sander under no load it runs fine.When i go to sand something it bogs right down to allmost nothing.There is no burning smell like ...

Question about Milwaukee 6010 - 6 1/2 Sheet Orbital Sander

1 Answer

...Orbital Sander to do the edges up along the house: I'll be using a bigger sander for the bulk of the job once this is done. My problem is, the sandpaper sheets keep ripping and need to be replaced. I ...

Question about Heavy - Duty 5" Random Orbit Sander - D26451

3 Answers

...orbital sander. why does this sander jump around on the material and feel like it's fighting me all the time instead of sanding smooth and easy? I have the same problem with a Porter Cable orbital ...

Question about 332K Quicksand Random Orbit Sander W/ Case

1 Answer

Orbital Sander (Quicksand) Model 333, Double insulated When sanding, it stops and starts, it sounds as thogh it is stuck and then gets going for a short while Hi, Sanders are prone to getting lots and

Question about BO5010 5" Random Orbit Sander

1 Answer

...orbital sanders. You need Makita part number 211236-8 or a bearing #6002LL. It's fairly easy to replace; remove the screw in the center of the pad and remove it. Depending on which is tighter, the ...

Question about Porter-Cable Variable Speed Random-Orbit Sander , Model #7336

1 Answer

...orbital sander Model 54-7206-2 and need a dust bag. Is it available, how much, and how do I order it in Canada? I just had the same problem. I couldnt find any information online.call the toll-free ...

Question about R2601 5-Inch Random Orbit Sander

2 Answers

Orbital sander problem: you go buy another one, go to your truck, take the new outa the box, place the dead one in the box, and walk back into Home Depot with the box and the 7 minute old receipt, and

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Tools & Hardware - Others Experts

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Tools & Hardware - Others Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...