Question about Playstation 3 (PS3) Console
optical lens assembly is damaged. you will need to replace this vital part to restore normal reading capabilities. The optical lens assembly incorporates both the blue ray and regular lens in the same
...will occur when the optical lens assembly fails. this will require you to replace the entire optical lens assembly(lens has burned out or, possible spin motor failuer). Contact Sony for this
...lens failure. if the cleaning doesn't restore normal reading capabilities, this will confirm my diagnosis. You will need to have the optical assembly replaced in this case. once replaced, your unit ...
optical lens assembly should be replaced in this case. the lens is either burned out or, the tracking assembly may be damaged as well. If you have attempted to clean the reading lens to no avail, this
optical lens assembly will need to be replace in this case. you can try to clean the lens with a cleaning disk.. this may wake the laser. if the cleaning doesn't produce results, replacing the optical
this dose not wake the lens Assembly, this will confirm major damage to the optics. you will need to replace the optical lens assembly in this case. it has failed. Contact Sony for this type of repair
...lens failure. if the cleaning doesn't restore normal reading capabilities, this will confirm my diagnosis. You will need to have the optical assembly replaced in this case. once replaced, your unit ...
...optical lens, if still not work you need to adjust optical lens focus a small trimmer near optical lens assembly. need trial and error method or else you need oscilloscope for the adjustment. if you ...
Question about 5-Disc CD Changer with SA-CD Playback
...optical lens failed to read the disc on its assembly. Yes, one caused of this symptoms is a dirty optical lens due to fine foreign object build-up on the optical lens itself like dust and static ...
...lens has to be in-assembled. This is not something you can do yourself. It is a complicated and delicate job. While being assembled the optical surfaces have to be optically aligned on a columator to ...
Usually answered in minutes!
27,926 Questions
21,069 Questions
11,924 Questions
9,005 Questions
5,602 Questions