Questions & Answers for: Mercury Mountaineer how to open the hatch

...open and close every door and hatch i dont see a switche on the door or frame the seatbelt on the drivers side gets closed in the door a lot and the passenger side door lock is stickesh when you use ...

...that is keeping the light on. On my 03 Mountaineer, the rear hatch emblem has a crack around it that allowed the door sensor to think the door was open. most likely the switch in the door pillar is ...

hatch open and when I closed it, it wouldn't open. Can I get to the latch to see if I can fix it? The fix was to pry off the back panel inside, peel back the plastic to check it out. Some WD 40 on the

hatch open and when I closed it it wouldn't open. Can I get to the latch to see if I can fix it? sure... but you can test the latch first.... use the shaft of a small/medium screwdriver and see if you

...hatch while it was still open, and now can't close? You'd have to take a screw driver, release the latch (lift up the handle, rotate the key) and then "move" the latch to the "open" position and then ...

...open trunk? The Hatch opens but we need the trunk openned to change light bulbs. There was a recall on the window hatch to replace the hinges that hold the glass in place. If you have not already had ...

...hatch open up electrically??? If not, then just take off the hinge bolts and struts, hold the new door in place, re install the bolts ( without tightening them completely) and then shut the door and ...

hatch won't open. The only way I know to open it is from the remote button. When the button is pushed I can hear it trying to unload but it's like the latch is caught. try lubing it up and not with wd

...open. Need a Picture diagram of back door lock latch Door lock/unlock switches all work. No prior problem. Closed back hatch and now when I lift unlocking handle it just flops like it is not engaging ...

...hatch it still won't open think it could be the other end of the rod not to lift gate piece but to inside that connects to outer side inside. Question edited for clarity. Question moved to model ...