Questions & Answers for: Vornado how to open a fan

open the fan up You can turn the unit around backwards and find three integrated clips holding the front cover on.I use a flathead screwdriver to disengage the clips and the front cover just slips out

...open up when the element temperature gets "too hot". They are located in between the 2 rows of elements. Seems not to be much of a fix for a heater if the fix won't allow it to heat! High speed fan ...

Opening Vornado fan (model EH1) for cleaning How do I open Vornado fan (model EH1) so that I could clean fan blades? How do I open vornado fan (model eh1)so I could clean fan blades?

...open and clean face the fan away from you look real close around the outside ring you will see them there small philipps screws hard to find one trick is to make a small scrach on both sides before ...

...open to clean 600 series vornado floor fan There are three clips the hold the grill to the cowl. Look along the back, outer edge of the fan. One clip at 11 o'clock, one at 2 o'clock and one at 6 ...

...fan (sits on pole which curls around to form base) and cannot figure out how to open it to clean. I've read through all the other questions, which indicate clips or screws. I see nothing similar ...

...soft brush should work fine. Also if you have it compressed air will help. this can be doen without opening up the cage. but opening up the cage might make it ...

...fan. Our Model 633 has both screws and clips. I first undid the screws at 3, 6 and 9 o'clock positions on the back of the grill, then used a flat blade screwdriver to open the clips at 10 and 2 ...

...fan is placed on a dafe surface in an open space. It is not kicking off when it hits its temperature limit, as the current temperature in the room is 67 and I am freezing. HELLLPPP please :) -Turn to ...