Questions & Answers for: Chevrolet how to open a fan

open when the guage is halfway up. then drops a 1/4 and back up to 1/2 then again it opens. But still no fan comes on. Do you think my radiator may be clogged. i did have to put a water pump on before

...fan, and can be removed with a open-end wrench. Step 4 Place the fan and clutch assembly on a flat surface with the clutch facing up, then pull the clutch straight up to disengage it from the fan. ...

...open hood and remove the bolts on the fire wall around the fan the fan will be bolted to the metal plate that is hiding the heater core.Know im not talking about the fan removel im talking about the ...

A QUICK TEST CHECK.HOTWIRE FAN TO SEE IF IT COME ON.IF NO FAN MOTOR NEED REPLACING.IF YES FAN MOTOR RUN.CHECK FAN FUSE AND RELAY.IF BOTH IS GOOD YOUR COOLANT TEMPERATURE SENSOR IS OPEN MEANING ITS BAD

...fan ,an open in the circuit are some of the causes. First make sure your getting B+ to fan when a/c is on if not its the relay or an open in the circuit. Next remove connectors from fan and jump the ...

...a paperclip, coin etc. and the fan is hitting that object. correcting either problem requires the opening up of the fan motor

few causes--- defective thermostat stuck open ( engine does not get hot enough to turn fan on ) . a failed fan relay, or a bad fan motor! or engine coolant tempurature sensor is bad. have a good day !

...the radiator, thermostat, fans and I is still the same. Run the car with hood open for a while and monitor the fan to confirm the fan does come on when required to, maybe you have a blown fan ...

...your fan is controlled by temp sending unit which sends a GROUND signal to the fan relay, which opens the curcuit to turn on the fan . Your fan has a CONSTANT 12volt supply going to it which is ...

...open test cool fan 1 fuse or the related fuse link to G or maxi fuse. cooling fan relay 1 damaged or has failed. PCM has failed. replace cooling fan relay and fuse see what happens. code P0300 MEANS ...