...onkyo ht-r510. When I turn the system on it automatically shuts off and goes into standbye mode. The standbye light blinks. I tried turning it off and back on after 30min. like the manual says. this ...
...Onkyo HT-R510 will shut down after several My Onkyo HT-R510 surround sound receiver will shut down after several hours of operation and the red standby light flashes. What could be causing this? This ...
...Onkyo HT-R510 Which pre-amp will work with a 1980s Marantz turntable and a Onkyo HT-R510? I've seen reference to a magnetic cartridge preamp, but am not sure that will work. The magnetic cartridge ...
...for individual speaker channel levels and distances from the listening position. ...
i lost my remote control for my ht-r510 and i want to reset my speakers volume, how can i do that manually? HI, Press the SPEAKER ADJUST button on the frond panel of the receiver. With this button you
Question about Ht-r510 600w 6.1 Dts Home Theatre Sys. W/powered Sub, All Speakers, Bundle
Onkyo HT-R510 left side speaker garbled Left front side speaker is garbled even when I swap sides with the speakers the speaker plugged into the left side input is garbled. I have replaced the speaker
Onkyo HT-R510 I have an Onkyo HT-R510 that is no longer functioning correctly. I purchased it as a home theater in a box, and have not changed the original configuration from the years that it was ...
Question about Onkyo Ht-r510 Receiver 6.1 Channel Dolby Digital / Dts
...Onkyo HT-R510 that is no longer functioning correctly. I purchased it as a home theater in a box, and have not changed the original configuration from the years that it was working fine. The issue is ...
Question about Onkyo Ht-r510 Receiver 6.1 Channel Dolby Digital / Dts
rca ouputs to onkyo HT-R510 http://www.manualslib.com/manual/302223/Onkyo-Ht-R510.html?page=10#manualhere is a link to the manual look under connections a/v
Question about Onkyo Ht-r510 Receiver 6.1 Channel Dolby Digital / Dts
R510 with my TV remote. Need Onkyo code to control this HT-R510 You should indicate you remote.
In any case, if code is not in your remote you should follow indications for No code
If you don
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions