Questions & Answers for: oldsmobile casting

i loss firing order 96 aurora The firing order is cast onto the manifold at each plug location and the distributor has the numbers of them also. Here is your vehicle. Thanks for using FixYa - a FixYa ...

need spark plugs order on the engine took spark plug wires off and need the order they go on the engine to put them back on. If I remember right the order is cast right onto the intake manifold of the

...plug wiring firing order You might find the firing order is cast into the manifold a lot of the oldsmobiles had this! The 1996 Oldsmobile Aurora 4.0L DOHC V8: The Firing Order is: 1-2-7-3-4-5-6-8 ...

need to no torqe and timeing and the wireing order on 2000 alero olds firing order 153624 ,i dont know where the timing marks are sorry ,head bolts depending cast or ally head ,cast 85 and ally 75 is ...

trying to find the oil filter to do oil change The filter is in the oil pan. you may need a special tool to remove it. Cast aluminum cover. The new filter should come with a new seal.

...Oldsmobile sillouette and are having repeated problems with flat tires and the service department at Goodyear can find nothing but corrosion on the rims which creates leaks. The Goodyear people tell ...

how do i set the firing order. What engine? If it's the v8 all GM v8's have the same same order 18436572. Also, it is usually cast into the intake manifold. If you don't know where number one is on ...

need to see a image of how plug wires go on a 1992 oldsmobile 88 royale need to know how plug wires go back on 1992 oldmobile 88 royale Intake manifold normally has firing order cast in, or get a shop

a oldsmobile silhouette 1999 On my 99 Silhouette with a 3400 V-6 the drain plug is on the drivers side of the radiator at the bottom adjacent to the mounting post casting on the bottom of the radiator

On a 1996 cast Cutlass supreme is there an emergency button for unlocking the trunk no emergency button