...back and they are as far back as they can go. Any suggestions. Change the toner with a new oki one, if that fails change the drum too Sensor error should inicate colour too ie K sensor error is ...
Question about Electric Industry C3520 Laser Printer
...sensor error on an Oki C3520 Laser Please can someone help me with my Oki. I have just replaced the balck & yellow toners (They were empty) and now the screen says 'check toner cartridge yellow / ...
Oki C5400n LED printer, its now displaying the error message: 162: Fatal Error. Does anyone have any idea what part of the printer is causing this error. The transfer beld is brand new and we've tried
Oki C3200 has the following error message 541:m Toner Sensor Error There are several reasons for this message... we will start with the easiest to solve. Here is a link: http://www.katun.com/downloads
...oki 9600 Fatal error 917 Replace the transfer belt unit. A 917 is a belt **** sensor error. Power off/on917:Fatal Error This is the message I'm getting on my Oki 9650 printer. I've turned everything ...
OKI c3400. I keep getting an error: "Toner cartridge lock lever is improper, drum missing, or toner sensor error. OFFLINE." I first thought it was the off-brand cartridge but have now spent more money
...sensor error displayed on oki c7300 take out the magenta cartridge. and make sure the edges are clean. There are little metal pieces on the sides where the sensor reads the cartridge. Also, make sure ...
...non-original Oki toner. The problem is the chip sensor cannot read the chip on the toner. So either the sensor is not working or the toner is defective. Regards Abhilash How do u rate the
OKI C9800 CYAN TONER SENSOR ERROR NEW TONER AND DRUM INSTALLED, SAME ERROR. remove drum units and clean optical sensors located at the back end of he drum slots and clean corresponding reflective ...
Question about 9800hdn Laser Printer
...OKI c5300 toner sensor error on the display screen, follow out the blog carefully. It contains all the needed information to help you rectify the error. You can also connect with OKI Printer Repair ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions