Questions & Answers for: oiling serger

Serger TS-380 plus sounds like it needs oiling. Where and how do I oil it? Where do I oil this little serger? here's a link for the serger, that's all I can findhttp://www.singerco.com/uploads

can serger for about 3 inches on my brother 1354d serger and then thread breaks First problem was serger made a "clunking" noise...oiled it and that took care of that problem. Have cleaned, ...

serger repair My serger has become hard to turn even though I have oiled it acording to the instructions. it's possible that there could be a loose or broken part in the serger, it would be a good ...

...oiling. Is this sound normal for this model? for all sergers? in response to all serger, no, after my babylock serger is cleaned and serviced it runs quietly. as for the brother, it's possible thats ...

...serger? some of them do not need oiled check your manual Some sergers do not require oil, others require frequent cleaning and oiling. Consult your users manual for guidance. Also, be sure to use the ...

serger? Sergers need frequent oiling with fresh good quality sewing machine oil. Consult the owner's manual and apply 1-2 drops every place (usually where metal rubs against metal) indicated and do it

Oiling Serger Troubleshooting For Any Serger Serger Machine Series Ep 4 Since your issue is with the stitch width function, you may want to focus more on that mechanism and work at getting it released

...oiling. (Use only good quality serger oil or Tri-Flow Synthetic Lube.)

Or it could have some threads hung up somewhere.

May be best to take it for service.

Remember, a serger ...

...serger requires much more frequent oiling (the moving parts behind the front door, ie the looper mechanics, etc.) than a sewing machine. In addition, about every year I take the bottom off my serger ...

...serger model. I'll try to find the oiling diagram, if the machine needs regular lubrication. Do not oil any sewing/serger machine unless the manual recommends that as part of the maintenance of the ...