...type of bolt do I remove from under the primary to drain the primary oil? There is a pipe plug that takes a Torx wrench to remove on the very bottom of the primary cover near the rear end of it. Once ...
...fork tube apart and pour out all the oil, use the "dry" figure of 11.2 ounces type "E" or 30 weight fork oil. If the forks are too stiff with this oil, drop back to 20 weight fork oil. Good Luck ...
...type E" fork oil that is stated by most websites as being close to 30 weight. A 20 weight oil would make the forks "softer" while a heavier weight oil would make them "stiffer". On dirt bikes, I've ...
...type of oil for my 2001 dyna low rider? Your Dyna came with H-D Syn 3 synthetic engine oil 20W50 weight from the factory. There are other manufacturers that make oil suitable for use in your Harley. ...
...type bearings. Since there is a gap between the contact of the roller bearing, the oil just flows freely though them. As long as your hydraulic tappets are not clattering loudly, you have enough oil ...
locating oil drain plug Hi if its an old type H.D the oil drain plug is on the oil tank as these engine s are dry sump type as aginst a wet sump type, dont know about the newer ones
Question about 2001 FXDWG Dyna Wide Glide
...is needed in front forks 2000 wide glide need to know what oil is recomended to use in front forks on a 2000 wide glide Hi Anonymous, 12 oz. of Harley Davidson Type-E fork oil in each leg. Good ...
fork oil capacities Hi Anonymous, 12 oz. of harley type " E " fork oil in each leg. Good luck
fork oil capacity 2003 Dyna Wide glide fork oil capasity 2003 DYNA Type E Fork Oil Amounts MODEL OZ LITER IN. MM FXDWG 12.0 0.36 7.28 184.9 FXD/FXDL 10.6 0.31 6.69 169.9
Question about 2003 FXDWG Dyna Wide Glide
what is the front fork oil capasity for 2003 FXDWG 2003 DYNA Type E Fork Oil Amounts MODEL OZ LITER IN. MM FXDWG 12.0 0.36 7.28 184.9 FXD/FXDL 10.6 0.31 6.69 169.9
Usually answered in minutes!
230 Questions
114 Questions
107 Questions
104 Questions
30 Questions