Questions & Answers for: oil tube engine block

...tube on oil pump with a new O-ring and hand-start two bolts. Install bolt retaining oil pump screen cover and tube to main bearing stud spacer finger-tight. Tighten oil pump screen cover and ...

Ad

Question about 2006 Sprinter

2 Answers

...oil feed tube That oil comes to turbo from engine block via turbo oil feed tube and also cools dawn the bearings and shaft It is an oil tube that supplies the turbo with much needed oil, under ...

Ad

Question about 1993 Cherokee Country

1 Answer

...oil inlet tube and strainer assembly in the pump body. If the tube is moved within the pump body, a replacement tube and strainer assembly must be installed to assure an airtight seal. To install: If ...

Question about 1994 Grand Marquis

1 Answer

...oil pickup tube to the oil pump and remove the bolt retaining the pickup tube to the main bearing stud spacer. Remove the pickup tube. Fig. 3: Oil pan bolt torque sequence-4.6L engine (click over pic ...

Question about 1995 Crown Victoria

1 Answer

...oil pickup tube to the oil pump and remove the bolt retaining the pickup tube to the main bearing stud spacer. Remove the pickup tube. See Figures 1, 2 and 3 Fig. 1: Position of wood blocks under the ...

Question about 1998 F150 Regular Cab

1 Answer

...oil pickup tube in a 1998 Ford F150? remove oil pan unbolt pickup tube and screen from engine block an oil pump if your to replace and i would.-. prime oil pump with oil by putting in screen and ...

...tube to the oil pump. Remove the nut attaching the oil pump pickup tube to the No. 3 main bearing cap stud. Lower the pickup tube and screen into the oil pan.Remove the oil pan from the vehicle.To ...

...oil dipstick tube on 1990 silverado replace broken oil dipstick tube my nissan sentra 1.8 2004  engine oil dip stick tube broke i took out some part but remaining part still in engine block so ...

Question about 2006 Explorer

1 Answer

Oil Dipstick tube broke. I need to replace, how do I remove the old one out of the engine block? Are there any retainers or clips that hold it in place or is it just pushed in and sealed with o-rings?

how to install engine oil dipstick tube 1999 grand prix gt oil dipstick tube unbolt the tube from engine block,wiggle it slowly pulling up and it will come out and repeat process to put it back in

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...