Questions & Answers for: Yamaha oil seals

leaking both oil and a mixture of oil and water My 2005 Yamaha YZ 250 is leaking oil and a mixture of oil and water. The oil leak is black and is coming from the rear of the inner primary.  The ...

Ad

Question about 2001 YZ 426 F

2 Answers

...oil seals as they wipe the fork clean. Before replacing try to clean them out with a thin piece of plastic. I use photo film, work the corner up under the seal and try to scrape out any dirt. If that ...

Ad

Question about 2001 YZ 426 F

2 Answers

oil leak under front sproket my 2000 yamaha yzf 426 has an oil leak under front sproket, there is a drop of oil on the bolt on the case under the front sproket not sure of all the places that it could

Question about 2004 WR 450 F

3 Answers

...it with kerosene, and replace it with clean oil. If it happens again you need to find where and how water is getting into your oil. where can i get info. on changing seals in water pump in a ...

i have a oil leak behind the front sprocket,there is a oil seal,do i drain oil to change it or is it high enough not to If you lean the bike over to the right , no oil will come out while you change ...

Question about 1993 XJ 600 Diversion S

1 Answer

I have oil leaking from around the oil filter (but not from the oil filter). What could the problem be? If you install an oil filter with out first wetting the rubber seal with oil, there is a very ...

Question about 1993 XJ 600 Diversion S

1 Answer

...oil to fork seals on a 2009 yz250f I think I blew my fork seals - can I add oil in the intermin until I can get the new seals to replace. If yes how do I add the oil YOu can but it will just end up ...

...oil seals go in The seal will have alip that faces to one side of the seal body. Inside it you will find a small spring around the lip or edge This has to face to the inside of the engine as the sump ...

how to remove damaged oil seal &replace with new seal on yamaha thunderace yzf1000r 1996 motorcycle Damaged oil seal Where is the oil seal you are talking about?? Usually use flat blade screw ...

...rear engine seal / oil filter seal /rocker covers front cover seals lift the motor out and replace all the engine seals and gaskets unseen internals hardened valve stem seals /burning oil through ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...