Questions & Answers for: Harley Davidson oil pressure troubleshooting

oil pressure gauge to an 88 harley 883 sportster.. to add an oil pressure gauge, you'll need to put the pressure pickup tube at the same place where the oil pressure sending unit is now. I've seen oil

...oil pressure no oil press rhondatim990 If this is true your motor would have seized up. I would not operate your bike until this problem is clarified. Hook up a analog type oil pressure test gauge ...

...oil pressure becold and hot ? Hi Anonymous, if your oil pressure gauge is acting eratic or your oil pressure light stays on you could have a faulty sending unit, gauge or air in the system or a ...

oil pressure gauge not working. how do i know for sure that the engine is getting the oil it needs? i don't want to burn up my motor! Hi Frank, if your oil pressure gauge is acting eratic or your ...

...Oil pressure light flickers Hi Anonymous, start by checking oil level in tank and it is between the add and full mark. With engine at normal operating temperature 180-230 degrees and the use of a 10 ...

...oil pressure gauge on 2003 ultra Hi Anonymous, if your oil pressure gauge is acting eratic you could have a faulty sending unit, gauge or air in the system or a restricted oil filter, start by ...

...oil pressure test procedure ,oil pressure specificatin 2005 flhrci how to check oil pressure and what is the oil pressure specs Hi Anonymous, start by checking oil level in tank and it is between the ...

...oil pressure 1450 Harley 2001 At idle no oil pressure Hi Anonymous, start by checking oil level in tank and it is between the add and full mark. With engine at normal operating temperature 180-230 ...

...oil pressure will be 30-38 psi at 2,000 RPM and 3-5 psi. at idle. The oil pressure light is designed to come on at 2 psi. or less. To accurately test oil pressure remove oil pressure sending unit and ...

...oil pressure the oil red light is on and I have the oil pressure gauge at zero, what's up to my 07 street glide? thanks to all Hi Antonio, start by checking oil level in tank and make sure it is ...