Questions & Answers for: Chevrolet Impala oil color

...LEAK AND WNAT TO KNOW WHATS LEAKING BEFORE PROCEDING Wow good ole chevy 3.4's with a leak..... What is leaking is it antifreeze, oil, or P/S fluid????? is it orange, green, redish, or dark in

color and how much smoke. Check your air filter and make sure oil is not backing up into it. Also, it may be a good ideal to go ahead and change the oil even though you arent at 3000 miles, unless you

...oil in your radiator cooling circuit: check to see if the water is also milky in color or you see violent bubbling in your radator cap opening (Make sure that you stop the engine, let the engine cool ...

...If you havn't already damaged the cylinder head your lucky .White gooey residue on dip stick or oil filler cap will be an indication of this. Rust colored water indicated the adsence of

How much oil do i put in the engine and what type is best for it? I would imagine you have some miles on this car already so since it is broke in I would recommend 10 W 30 oil. Quaker State or ...

Tappets knocking very loudly, there is oil in engine. If you have the 3.4L engine in your car you should check the anti-freeze level to see if it has gone down. Also, pull the oil fill cap off from ...

...color (happens when water and oil mix). No matter what be prepare to replace the lower/upper plenum gaskets, air intake and the tube that connects from the air intake to the EGR. New air intake comes ...

very over filled, check and make sure there is no water in the oil. If the oil is the color if coffee with milk (tan colored) then you definitely have water in it and most likely a leak in the head(s)

color on your oil check dipstick...that is a sign the head gasket is leaking...a much more costly repair...Your least costly repair could be a defective radiator cap...free pressure tests at you local

...color is the smoke?  The valve seals may be bad. Thus oil leaks into the combustion chamber, and will cause the engine to smoke. Or it could be getting to much fuel at start up. Just let us know ...