Questions & Answers for: Wurlitzer oil color

all the way back. Clean with alcohol until it begins to move freely, then re lubricate with a light oil, like sewing machine oil

Colored plastic sheet in light tower has fallen to bottom of tube I cannot figure out how to remove the clear tower tube in order to reattach the plastic color in the tower tube so the tube changes ...

...idler wheel or belt after taking it off of the jukebox in clean soapy water to get all of the oil gease off of these parts. Dry well. Check the motor and slightly lubricate if required. Replace ...

I need the colored tubes that make the jukebox change colors. wurlitzer 1050 One More Time Here you go dude: http://www.grandamericajukebox.com/ Call them and ask for a supplier or maybe they can hook

...and the buttons are sticking I think it needs a service but could it be that the mech needs oiling or something? I haven't done anything to it myself but if it is easy enough to do I will

the bubble tube is broke Hello brittpierce, Remove the broken tube ASAP and clean off any oil from the surfaces to avoid staining. Check out www.victoryglass.com for a spare part or contact a ...

the motor that spins the colored tubes is squealing The motor that spins one of the colored tubes in my jukebox makes a horrible squealing noise. It's definitely NOT the actual turning of the ...

...at an angle. Try raising it up or down after spraying.\ Once you get it moving again make sure you oil the piont with liquid bearings or other quality oil. Because WD40 will not keep it going it

...reaches easily to the areas, and you can get the lube exactly where you need it. Any thin machine oil is fine. Seeburg used to make sewing machines so sewing machine oil work great. Here is a mech ...

...Oil will just run down the color wheel, so consider a little dab of Vaseline or light grease. See if they are catching anywhere then a very small drop of oil Apply a little 3 in 1 oil or something ...