Questions & Answers for: Chevrolet Venture oil change

...change oil light on message center after changing changed oil cannot erase light saying change engine oil I had a chevrolet truck with the same thing. You had to turn key on (do not start) and press ...

CHANGE OIL LIGHT.FIRST YOU SWITCH IGNITION ON. SLOWLY DEPRESS AND RELEASE THE ACCELERATOR PEDAL 3 TIMES WITHIN 5 SECONDS.WHEN CHANGE OIL LIGHT FLASHES INDICATING  OIL LIGHT RESET.SWITCH

...oil change is required. If a situation occurs where you change your oil prior to a "CHANGE ENGINE OIL" message being turned on, reset the system. With the ignition key in "RUN" but the engine off, ...

...why it would all of a sudden just do this? What you need to do is to change the oil seal on your engine and the gasket, I can assure after you change this parts there will be no leak on your

change engine oil 2000 model chevrolet venture . With the ignition key in RUN but the engine off, repeatedly push the trip/reset button until OIL is displayed on the Driver Information Center. 2. When

...change the oil turn the key on press the gas pedal to the floor 3 times with in 3 seconds the change oil light will flash then go out You need to reset the engine oil life setting located in the same ...

Change Oil light is on and oil has already been. How do you reset it turn key to on position do not start vehicle, depress gas pedal to floor three times the oil light comes on every 3,000 miles or so

oil then change oil again then in 500 miles are so change it again you should be cleaned out. you can use a oil flush between the first startup warmup and oil change.that will help it clean out.but if

change the oil keep saying need oil change on a 2001 gm i believe you turn the ingition to the run position with the engine off and with-in 3 seconds step on gas pedal 3 times all the way to the floor

...Oil change details?http://repairhelpcenter.blogspot.com/2012/01/toyota-highlander-sport-oil-change.html---------Low oil pressure ...