Questions & Answers for: Worx off line

LINE SPOOL: First take off the cap (see above) and remove the old spool. Place new spool into cutting head. Feed one line through the eyelet, then repeat for second line. Release secured line from the

...line in place while you place the spool back on the trimmer. If you look at the spool, you will find, on one end or the other, an arrow showing direction to wind the string. Follow the direction and ...

...there so that they are pushed towards the battery terminals, (push the toothpicks in and break them off in the slot between the metal and the plastic housing until the space is close enough to touch ...

line slaps off the concrete, any sharp edges or roughness on the concrete will tend to snap it. What you could try is heavier gauge strimmer line which might last longer. I used to use petrol strimmer

keeps shutting off after about a minute of use trying adjusting the carburetor ... check for grass long weeds around the cutting string area . it it all out it.s overheating (binding )

...off try to manually extend the line. When you push ******* the spool manually with one hand and then pull on the line with the other hand the line may extend. If it does and you tap it in the ...

...job, it breaks off in just a foot or so. We got the line spools refilled, but that does not seem to have fixed the problem. Sounds like line is on backwards, wrong diamiter line or worn parts.Joe ...

my worx trimmer line does not feed the auto feed for the line does not work According to the manual it only advances 1/2" so if 4" break off, you have to start/stop 8 times.

off. Remove & discard(there has got to be something they can be recycled as?) If you are right handed, hold the new spool firmly with left hand with flat side with the arrows up, keep a firm grasp

...does my trimmer line break off so easily I use the trimmer & the line brekas off so easily can be --old line --to small in size for trimmer --constant hitting solid objects/like concrete--cheap ...