Questions & Answers for: Chevrolet Corvette does not turn

...not turn on when I turn on my headlights on. If I continue driving they have eventually turned on. It acts as if a wire is loose but I can't seem to find a solution. I had the same problem. The local ...

not turn to off position so key can be removed I have a 1985 corvette that will not allow the key to be turned to the release position so the key can be removed. No other problems with the car running

dne The antenna is set to go up when you turn on the radio, and go down when you turn the radio off. Does the radio have power, even though it is not functioning? Could the fuse for the radio be blown

...... turn signals come on but are steady lights and do not blink. We have replaced flasher, but still turn signals do not blink. ARE THE FRONT AND REAR TURN SIGNAL INDICATOR BULBS ON STEADY AS

...not successfully reset, turn ignition "OFF" and repeat the procedure from Step 1. [/quote] Turn engine key on. Push gas peddle to floor three times. Turn key off then on. Light should be reset. Hope ...

...relay, they are the same. If this work replace the relay, if not and you know how jump the fuel pump at the relay plug to turn it on. If it wont turn on the pump is bad. the pump is in the fuel

turn signals wont work and dash lights are dim Check your turn lights back and front. There should be one or more burnt. The turn signal will not work if any of the bulbs is burnt. Joe.

...I started the car now I can't turn the key to the off position. I can wiggle the colume and the engine will turn off but the key will not go to the off position press the brake when removing the

the turn signal light on dash will not turn on when i turn on the turn signal the light all work when you turn them on on dash turn signal not working blown filament in bulb replace bulb.

...not turn wipers off after they are turned on Since the ignition switch has to kill the power to the wipers. Replace the wiper switch. Carbon build up inside the switch is why it won't turn off. You ...