Questions & Answers for: Whynter does not turn

Question about SNO 13000 BTU Portable Air Conditioner

1 Answer

...turn on at all. I checked the fuse at the plug in and it is fine......Unit is about 10 months old......... Could be a lot of things - but I'm wondering if when you are checking the 'fuse at the ...

Ad

Question about ARC12S Air Conditioner

1 Answer

...plugged it into a 220V outlet and evidentally fried the components. I would imagine it's not fixable but just thought I'd run it by you. Karen Bohlin [email protected] Hi Karen, and

Ad

Question about Portable Air Conditioner

1 Answer

...not triggering the switch. If that doesn't solve the problem. Turn the Master ON/OFF Switch to OFF, unplug the unit for 12 - 15 minutes. Then plug it back in and turn the Master Switch ON/OFF ...

Question about ARC14S Air Conditioner

1 Answer

not an option. Turn the unit OFF, unplug it and disconnect the exhaust hoses from the unit. Roll it to a floor drain or outdoors to drain it. In case you have misplaced your Owner's Manual, I have

Question about Portable Air Conditioner

1 Answer

...not low enough. 2. The air intake filter needs to be removed and cleaned. 3. The water collection tank is full and needs to be drained. 4. Obstruction in the exhaust hose(s). Be sure to turn the unit ...

...turn on) Unit turns on and Interior light not turning on. Temperature not showing up either. Brand new out of the box. Plugged in and it lit up, then turned off. Now won't turn on (light ...

...turn off the water supply to the valve before working with this part. (HOW TO TEST INLET VALVE: Inspect the filter screen where the supply line connects. Remove any debris or deposits that may have ...

...cleaned it out to start again. I keep it full. I have 4 other units of the same model that do not have this problem. I am capable of running tests, and installing/replacing parts. What steps

turn it on the temp light flashes 65 degrees when lowered it changes but goes right back to 65 and flashes and will not kick the compressor on. I have replaced the relay and overload on the compressor

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Whynter Heating and Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whynter Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...