Questions & Answers for: Oldsmobile does not turn

...turn signals do not work.I've changed all bulbs, Checked, changed fuses.turn signals light, but do not blink. under the dash on the driver side there is a round or square sliver box that should say ...

...not oderate Turn signals do not operate. Fuze is OK. How do I get to the bulbs to check them? If turn signals do not operate on either side, the issue is with the flasher unit, located under the dash ...

...not turn to the lock position. So, the battery light comes on. Have you tried turning the steering wheel one fourth turn in either direction, while turning the key to lock?? this was happening to me, ...

not a relay..since you one turn signal work..a turn signal relay it call a flasher which control both turn single it under the dash(driver side)...turn signal relay it the only round one on there..you

...turn signal lights do not flash, appears to be a simple burned out bulb. If one of your left turn signal bulbs are burnt out, then the #552 Flasher Unit in your fuse box is NOT the cause. It's the ...

...NOT WORKING WHEN USING TURN SIGNAL. 4. WHEN PUTTING ON THE HIGH BEAMS (or pulling the turn signal lever towards you) THE BRAKE LIGHTS/TURN SIGNALS WOULD WORK. (But the brake lights did not come on ...

...TURN ON THE IGNITION TO THE ON POSITION ENGINE OFF, FUEL PUMP WILL TURN ON FOR3 SECONDS THEN TURN OFF NOT GETTING NO CKP SIGNAL OR CMP SIGNAL PCM TURN OFF FUEL PUMP RELAY IN WHICH TURNS OFFFUEL PUMP

How to turn headlights off when u just want to turn ur car on not start it. How do you make your headlights from turning on? pull emergency brake then turn car on & headlights should not come on

...not turn the car off I drove the car and when I was getting ready to turn it off the ignition key will not turn. I had to take the fuse out to turn the car off. The key is till in the car. I can put ...

...not with turn signal..flasher replaced. is It the multifunction lever then?? There should be a turn signal flasher and a hazard flasher. They are two different parts. If you replaced the hazard ...