Questions & Answers for: not stitching

kenmore 19365 decorative stitch will not stitch decorative stitch will not stitch You have to key in the number for the stitch on the stitch panel

why straight stitch will not work but zigzag and herringbone stitches work on my machine. my straight stitch is not working but all my other stitches are working. when I set the knob to straight it ...

stitch I just can't seem to get it right Skip the first stitch, knit the second stitch normally, do not slip it off, Now turn your work around so you can knit the skipped stitch normally and slip both

Stitch length will not change My stitch length will not change Setting Stitch Length: A Quick Look at How and Why ... www.sew4home.com/.../sewing.../setting-stitch-length-quick-look-how-a... Mar 3, ...

...not have a basting stitch, then you can't make a larger stitch. You could try free motion stitching where you drop the feed dogs, use a darning foot and manually move the fabric, but getting the ...

...stitch length and a wide zig-zag. Test it and keep adjusting the stitch length so the thread will not overlap from stitch to stitch but also that the stitches are close enough so no fabric shows ...

stitching. The stitches are not too far apart to allow popped stitches under stress and gapping between stitches nor too close together that would make it difficult to remove stitching when correcting

...stitching, shorten the stitch length until the threads lay next to each other so no fabric shows between the threads but the threads do not overlap. It would help if you have a satin stitch foot so ...

you want to use, adjust the stitch length and width as desired, and start sewing! It's important to note that the G2 Stitch series is not available on all models of the Bernina 1530 Inspiration, so if

ACTIVA 210 WON'T DO REVERSE STITCH If your Activa 210 sewing machine is not performing the reverse stitch function, there could be a few possible reasons for this issue: 1. Incorrect stitch selection: