Questions & Answers for: Lexmark C does not power on

...power cord to the electrical outlet. If the button is not lit, press . Reinsert the print cartridges. If the error does not reappear, the problem has been corrected. If the problem reappears, one of ...

...not power on Check your power supply with a volt meter. If there is a transformer, check the transformer for its rated output. If there is no power at the end of the cord/wire, you will have to ...

...power supply. Try not to use extensions or power strips, plug printer straight to the wall power outlet or plug it to a different known working power outlet. If the power supply is working fine, plug ...

...not receiving the right amount of power. But try this. Power the printer off, wait ten seconds, and then power the printer back on. If possible, connect the printer's power cord directly into a wall ...

...power cord to the electrical outlet. 5 If the button is not lit, press . 6 Reinsert the print cartridges. If the error does not reappear, the problem has been corrected. If the problem reappears, one ...

C524 PRINTER WILL NOT POWER ON PRINTER WILL NOT POWER ON Check the power supply and the power coming into the printer to make sure the outlet is ok

...not plugged into a wall power point, change it to a power point mounted directly on the wall. Personally, I never got a Lexmark printer to work doing this, but this is in the manual. If this won't ...

...not plugged into a wall power point, change it to a power point mounted directly on the wall. Personally, I never got a Lexmark printer to work doing this, but this is in the manual. If this won't ...

...not getting enough power to turn itself on properly. Try to re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back ...

...fan, LED). Verify if fan is running. If fan is not running, replace  LVPS (Low voltage power supply. Part # 40X5409. For further assistance please contact Lexmark Technical