Questions & Answers for: Iomega does not power on Office Equipment & Supplies

power supply, but need to check that the polarity is right before using. The polarity is not marked i on the case. Anybody see it in the handbook - or can stick a meter on their power supply for me? I

5 seconds. The power connection to the drive is damaged. The drive is not getting enough power to spin the drive properly so it is beeping. Check the power cord and/or the USB cable for damage as well

...not be getting enough power or the drive may have failed. If you have an external power supply for the drive, make sure it is connected to power and it didn't fall out of the outlet. If you can try ...

...not sure if it was the power source or my laptop but both stopped working and all I have is the light blinking every two seconds and no response. Any ideas what happened? Dear tmetal, Hard drive anda ...

...power supply on my external drive and its blown the board inside is it replaceble constact Iomege ! Tell them my HDD is not powering up . do not tell them that u did it . See if u can get ...

...not getting the power from the port u r connecting to. So please check it with other port . If the same behaviour then it is physically damaged and u have to take it to the service centre Hi All - I ...

power is not coming on. Samething happen to my Iomega screenplay media drive. My problem was a AC/DC power adaptor that was in short-circuit.I bought one off EBAY and all good again. Search for 12v dc

power does not reach any more the disk/it not enough for the disk to make it "readable" when "working" thus I am not being able to copy/delete files after some time. Do you have an

not power on all cords plugged in as usual, the Ego will not "light up" no power The obvious answer is that the power supply is dead. If there is no external power supply connected then try connecting

...not power up The obvious answer is that the power supply is dead. If there is no external power supply connected then try connecting to an external powered usb hub. The drive is not getting power and ...