Questions & Answers for: Chrysler Pacifica does not power on

Question about 2004 Pacifica

1 Answer

...Hatch wont open Trying to manually open the power hatch. It will not open manually, or electrically. The manual claims that you can open it from an access panel but...... whats a power hatch ...

Ad

not have power here you may have a problem with your ignition switch, antitheft system or blown fuse. If you do have power here, you might have a bad connection, bad solenoid, or battery problem. Good

Ad

...not getting power. please check weather it is getting the power by multimeter. if it is not getting it there me several causes 1.fuse blown out. 2.junction box damaged 3.activating switch ...

...NOT equipped with power adjustable pedals, pull the accelerator pedal upward and push the brake pedal downward for clearance to remove the heater core from the air distribution housing. Remove the ...

...not working, check for power at the blower motor electrical connector under the right side of the dash.  If there is power present when the blower is not working, then replace the blower ...

...power seat is not operational in any direction, check the power seat circuit breaker, located in the Integrated Power Module.Black box above battery  Obtain a DRB III(R) scan tool and check for ...

...power windows do not work on the driver side. The electronic seat adjusts do not work on the drivernside. The power windows do not work. All of this started happenong at the same time. Check for ...

...I have power at each pump connector when the switches are pressed. I do not have ground at either black wire on the connectors. Both pumps work if you manually apply power and ground. Great to ...

Question about 2008 Pacifica

1 Answer

...power. The shop called and said they could not get car out of park so we had to tow to dealership. Is this an ignition switch or bigger problem? Thank you... most likely is el. part of your ignition ...

Question about 2006 Pacifica

2 Answers

...power brake booster from sucking in any contamination as the master cylinder is removed. This can be done simply by pumping the brake pedal, with the engine not running, until a firm feeling brake ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...