Questions & Answers for: nortel m7208

...Nortel Norstar M7208 If you have call log set up you can access the log log by pressing feature 812. To program that feature as a one touch button press feature *3, press the button you what to be ...

Meridian M7208. I managed to reset the default Meridian M7208. I managed to reset the default speed dial button to a conference button. I wilsh to reset it to speed dial. Since I have no idea how it ...

...M7208 corded phones, plugged in the phone line and nothing - Q; what do I need to do to get them to work - they are not part of a telephone system. Thx, bn Nortel M7000 series are proprietary sets ...

...M7208 Nortel Do a button inquiry to find your prime line(intercom number). Press feature *0 then the button you want to identify. Your prime line will be either the bottom programmable button or the ...

...M7208 phones were delivered with the very first Nortel systems and if you have one of those, you're not getting CID. The CICS cabinet or higher requries a CID trunk card and IIRC 5.0 or higher ...

Nortel Meridian M7208 page not working... Here at work I have a Nortel Meridian M7208 phone. In my old office lines 1-4 were for calling out. The 5th button was to page around the store "Paging ...

Nortel Norstar M7208 always reads "Calls For You". What can i do to clear display? Nortel Norstar M7208 always reads "Calls For You". What can i do to clear display? This is Caller ID log ...

Nortel M7208 will not dial I have a Nortel M7208 the display screen is working, but when I press any of the lines to make an outside call I get a ringtone. However; when I dial a phone number the ...

Nortel systems you use "Feature Key" **266344 (Feature **CONFIG) . You will need to program from a M7310 phone because you need the 3 soft keys under the display which the M7208 does not have. The top

...- hehe....

If annoys you, get a used one from Amazon for 44 USD

http://www.amazon.com/Nortel-Meridian-M7208-Telephone-Gray/dp/B0018JVOP2

Sending it to repair might cost you