Questions & Answers for: nortel cics

...nortel CICS This is the forums for Avaya, I would repost in the Nortel side. BUT, i do know the CICS needs to be of the correct revision to work with CP. Have you checked the ports (using a phone), ...

Nortel CICS with 6.1 software Anytime you dial a "3" from any phone on this Nortel CICS 6.1 system the call does not go through. I can change the line setting to "Pulse" and it works fine. I put my **

...admin says our phones are NOT adjustable if that tell you anything! You could have a CICS, and MICS or a Nortel BCM. Which do you have? You will need to access admin programming, do you know

nortel cics phone system lines remain busy and I can't call in or out. What can I do? Reset the system. Just kill power and let stand for 10 seconds before restoring power. If problem persists, ...

...Nortel Norstar CICS but the internal power supply is not working Power supplies come with the main chassis. You may need to have the chassis replaced. are you sure it is receiving power ok? You can ...

M7000 series are proprietary sets which require a nortel MICS, CICS, or an older 8x24, 6x16, or 3x08 in order to work. If you have the system, it maybe that the jack isn't activated with a system port

...It would be unlikely that your system is a CICS, but this is an idea of where the programs are and what level you need to access them. ...

...Nortel CICS system with CLID card(s). CI trunk cards handle up to 4 lines per card making the capacity of the system 8 lines by 16 stations.The CICS system will work with the existing m7310 sets you ...

...least a Nortel CICS cabinet running 4.2 software or higher, and a trunk card that has CI on the face of it. That and programming and you're good to go :-) (I'd call my Nortel dealer if I were you) ...

...Nortel Key Service Unit, an ICS (MICS,CICS), BCM (50,100 etc), Norstar (308,616,824), an Avaya IP Office running Nortel cards, or there is another company that makes a Nortel emulation key system but ...