...phone system trouble or voice mail trouble. Most Norstar system use a capacitor for memory backup and they typically do not fail. I have seen circumstances where rapid on/off cycles (that can happen ...
Question about Startalk Flash 2 Phone
inactive feature. Reset flash card and reentered bail boxes. Now when callers call in they are unable to enter an extension to reach the employee or the voice box for this extension. Any ideas??? Does
...to be reset? I have a Meridian system If the feature codes show as inactive, the phone system is not seeing the voicemail. Hopefully this has been fixed by now, but you may need to call in a
...norstar, but when I put in the feature code it reads 'inactive feature'. All the web sites I have checked give the same feature code. Any suggestions for an alternative? Thank you! This generally ...
...Norstar phone systems. Occasionally, both the phone system and voicemail need to be rebooted to allow the two to sync up and "see" each other. Occasionally the Norstar voicemails go bad where they ...
Question about (NTAB2666) Audio Conference
...INACTIVE FEATURE. WE LEFT WORK ONE DAY IT WAS WORKING CAME BACK THE NEXT DAY AND NO VOICEMAIL WORKED AT ALL. NorStar (NTAB2666) Audio Conference - this is a conference unit. You issues is with voice ...
...inactive feature when entering feature 983 the phone system and voice mail unit are not communicating. This usually requires a power reset to clear. Or the voice mail unit is in trouble and a vendor ...
norstar M7310 features inactive All features are inactive. I have done the following: 1. Press [Feature] **938378 (XFtest). The password will be 266344 (Config). 2. Your display will read Feat code: ...
Question about M7324 Telephone
My NORSTAR M7324 Feature 933 is not working. Responds as "Inactive feature". Please help. Did it ever work in the past? That feature may not be supported on your model of phone or common equipment.
Question about M7324 Telephone
...Norstar M7310 features inactive All features are inactive. I have done the following: 1. Press [Feature] **938378 (XFtest). The password will be 266344 (Config). 2. Your display will read Feat code: ...
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions