Questions & Answers for: norlake walk freezer problems

walk-in norlake freezer im having an issue with my walk-in norlake freezer not cooling down its stays at a set temp. of 30 degrees and my fans are running and my compressor is running but the temp is ...

GE GSS22JFMCWW I have defrosted it completely, plugged it back in and the problems still are there. The signs are minimal at first but after a few days it gets significantly worse. try this link ...

freezer to cold refrigerator not cold enough I noticed that freezer is getting frost buildup on the back, when you turn the temperature to a lower setting then no cold air blows into the frig,freezer ...

top of the freezer not freezing The top of the freezer is completely thawed, the bottom shelf is freezing fine. On the fridge side the bottom is freezing and the very top shelf is warm. SealedSystem ...

Can a freezer be operated in temperatures below freezing. We have been given an upright freezer. We do not have room for it in the house but wondered whether we could operate it in the garage. The ...

freezer and frigerator stopped cooling all of a sudden. Whirlpool hi..you either have a bad overload/relay on the compressor or the compressor itself is bad,try replacing the overload/relay first and ...

...norlake walk in freezer and the problem is buildup ice and the temp is 35degree right now how to bring the temperature back to zero degree You have to defrost the coil by turnning of the unit and to ...

norlake freezer 6x6 not freezing enough i have a norlake freezer. the temperature is around -1 to -5 deg F. i dontknow wat the actual temp should be. or i think there's some problem with it how i ...

model no 253.5711860 side by side the freezer will not stay cold enough. builds up ice, changed computer still did not fix. When weather colder freezer colder The board will not fix the problem if the

Please help. Have norlake. Model klb66cl temperaturereads 10 degree farenheit.is it okay. Need to bring it down. Is it copressor problem? Help.. Thanks. if the temp is 10f compressor is fine, just ...