Questions & Answers for: nordic track treadmill belt move

...track. We try to center the tread, but when its on the tread will eventually start to move to the right and you will hear the rubbing of the tread on the plastic. Make sure treadmill is running when ...

...nordic track exp 1000 not moving today but worked this week. machine turns on though if you hear the motor moving with no belt turning the problem is either the front roller or the drive belt. If ...

...nordic track c2255 - having belt issues when I run(i am 200 lbs and the belt skips) i think the tread is properly adjusted - I took the cover off and noticed two idler arm spring settings - a lower ...

Nordic Track A2250 Pro stuck inclined My Nordic Track A2250 Pro is stuck in the incline position. There was a knocking noise coming from the rear left (when on the machine) corner. I tried to fix this

...Nordic Track A2550 and the belt wont move 1) test your circuit breaker home,reset2)test the outlet for 115 vac 3)test the power cord if some wires is loose or cutting4)reset your circuit breaker ...

...nordic track treadmill 8600 has controller error08 and belt does not move push the start button the belt doesn,t move. on service mode shows "controler error 08". Dear Sir:Please run the ...

Nordic Track X5 belt won't move The treadmill turns on and begins to count the seconds but the belt won't move. This has happened before and after a few days it starts up again but I am ...

Nordic track and I ended up calling the Nordick track service. No one on the internet really seemed to have my issue buttoned down. They were GREAT!! 1-877-993-7999. They help you troubleshoot to find

...moving. I have had this machine for several years with no problems. Your thoughts are grea tly appreciated. I miss the treadmill! Check bewlt for bad bearings/dirt in bearings etc. replace drive

Nordic Track T12 si , belt won't run Nordic Track T12 si , received unit from relative plugged it in and everything was fine pressed start and got it up to 20 but then used incline and may have ...