Questions & Answers for: noisy dehumidifier compressor

...compressor does Yes, the fan motor should come on when you start the unit. I just came from my basement where i had the same problem. My fan was not working- it was noisy at first, then it stopped ...

Dehumidifier runs loud When I turn my system on it starts fine then within 45 sec it starts running in a really high gear and very noisy. It also freezes the coils after a period of time and will not ...

Compressor doesn't work any more The unit ran well in our bedroom but was too noisy so we moved it to another room where it blew a fuse. We moved it to another room with a separate plug & now the ...

DEHUMIDIFIER and they make lots of noise and vibrate a bit, this is normal in these Dehumidifiers .. These can be noisy. Does the noise only happen when the compressor runs? These compressors float on

...dehumidifier feet on foam or rubber vibration absorbing pads. Touch all sides of the cabinet with the compressor running to see if your touch will dampen the noise. Once the noisy area is identified ...

noisy and not pulling water from air? If you can hear its fan running but it produces no condensate, then it's apparent that either the compressor is not running, or that the humidity setting needs to

...noisy. Any solutions? I checked the screws on compressor and they are tight. Pull the plug on the unit and strike it moderately with your hand listening for any vibrations. Try to pinpoint the source ...

...dehumidifier very noisy? It makes a large grinding sound whenever it runs. Does it need to be cleaned? What do I clean? I would guess that some rubber anti-vibration mounts have aged. If so this may ...

dehumidifier 0526011 will not shut off even when is reaches it humidity level. How can I get it to shut off. The compressor stops but the fan keeps running. this is a newer feature that a lot of units

...Dehumidifier that has begun making a rattling noise. It is still working fine, but uncomfortable leaving it on. Is there a fan or some type of bearing that may need to be replaced? The manual I have ...