Questions & Answers for: needle out sync

...sync with the needle. with the needle down all the way, this hook grabs the upper thread and creates the loop for the stitch. sounds like the needle is too long. check your operating manual for ...

...sync with the needle and has broken numerous needles - how can we get the bobbin back in alignment with the timing of the needle???? [email protected] Hello, My bobbin holder is out of sinc with the ...

...to replace a busted gear on my wife's sewing machine. now the needle/bobbing is not in sync. how do i adjust the timing of the neecdle/cam look here: ...

...sync. The Needle is late. My Singer Millennium is out of sync. The Needle is late. How do I adjust the gears to correct the timing. Any suggestion is appreciated. Thanks in advance. TR Timing ...

...sync problems with the needle hitting the bobbin assebely and bending or breakink the needle timing probably out then, best handled by a technician needle hitting bobbin case on a white classic ...

...sync. or needle size is too small for weight of fabric you are sewing. check out www.sewing.about.com for needle size info and use new needle for each new project. if yoy suspect timing out take to ...

...needle is over tightened does this require re-synchronisation of carbs? Usually around 2 turns +/- 1\4 turn. make sure they both are the same. syncronizing sets the carbs to open the same amount, ...

...sync with the needle bar and hook. What is the sequence neccessary to put the feed back in sync? It would be in the Service Manual for your machine. That is a common adjustment that technicians make ...

...likely the machine has been knocked out of time--the needle and hook do not sync. Search for sewing machine timing or take it for service. check needle / hook timing increase tension on needle ...

My BM 2600 needle threader seems not working, I can't make the thread go in the needle. Can you help me. Thanks. If your needle is too small, the threader cannot fit through the eye. It's usually ...