...needle won't go in the whole anymore. It keeps hitting the plate on the back of the whole. I know how to put the needle in and I have changed it a few times to see if it wasn't a faulty needle. But ...
...keeps breaking needles, they are striking something during use. Hello, Here are some things to try. * Your broken needles may have been too thin for your fabric. Make sure your replacement needle is ...
...capability allow you to adjust the position of your needle ? right, left, or center. If your needle is not positioned correctly, it may be hitting your needle plate or pressure foot. Hope this
Question about LS-2125 Mechanical Sewing Machine
...needle keeps hitting the plate and breaking. How do I fix this? Take the needle plate off and see where it needle is connecting with the bobbin. The bobbin case may not be in place and this is what ...
...needle keeps hitting the throatplate, (I have broken 2). It was working fine. I don't know what I have done to cause this! e. Hello, First, check the position of your needle.Machines with zigzag ...
Question about LS-2125 Mechanical Sewing Machine
...needle keeps hitting the bobbin plate. first change the needle--flat side to the back of the machine, make sure the needle is inserted all the way up into the needle holdermake sure it's the ...
Question about LS-2125 Mechanical Sewing Machine
...needle on my babylock keeps on breaking. I have tried stretch size 90, Ordinary size 80 & 90 also? Any hlp would be most appreciated as its driving me mad. I have a large project that needs ...
Question about LS-2125 Mechanical Sewing Machine
...needle keeps hitting the plate .what do I need to adjust to keep the needle from hitting the foot I put the foot on .when I put needle in the down position it hits the ruffler foot You may need to ...
Question about LS-2125 Mechanical Sewing Machine
...needle keeps hitting the metal plate, and its a brand new needle. It seems like the alignment of my brand new machine is off. Basically, the needle keeps hitting the metal plate where the bobbin is, ...
Question about LS-2125 Mechanical Sewing Machine
...on does the need re position it self can't sew need help. If it's hitting the needle plate, try installing a new needle. If it is still hitting, then it needs adjustment. Take it for service.
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions
