need foot switch for this machine. I need a foot switch for Alesis sr-16 drum machine. I emailed Alesis; no reply. Any suggestions? What you need is 2 unlatched switches 1 for the stop start function ...
switch using 12-2 romex? Only if you have two separate 12/2 lines. You need 12/3 w ground, because this is needed to connect the two switches and carry the neutral. You can start with 12/2 power going
Question about 1451-2ACP Grounded Quiet Switch
...switch in my bathroom. I need to replace the light switch in my bathroom. The faceplate is metal, and the switch doesn't show a grounding screw (leviton 01451-W). The replacement switch I found has a ...
need to use a four-way switch if you are wiring three or more switches together to control the same light. In the case of three switches, only the middle one needs to be a four-way, with the first and
...turn it on, or when the the pressure switch does, or when both switches are on. But it won't turn itself off. If you want to disable the pressure switch, you will need to take it out of the
...switch, all you need are two wires from replaced switch plus a neutral wire. Open following link for detailed wiring instructions and online manual. ...
...switch you may need to turn the key a little while pulling off the switch assemble opposite way they you will need learn the new switch to the system you will need to cycle the switch to crank ...
...switch and timers.Some timers need a neutral wire, while others, such as spring-wound timers do not need neutral wire: each of these items is wired separately.Copy following link for switch ...
Question about Decora Gray Rocker 4-Way AC Quiet Switch
...need a 2-wire coming from power source, 3-wire from first switch to 4-way switch then 3-wire to last switch. white wires (neutral) get connected together. Depending on the layout of the switches. i.e ...
Question about Decora Gray Rocker 4-Way AC Quiet Switch
...switch as separate switches for each light. I'd need to use on live feed for both lights. Here is a double wall switch. Power into switch as with any switch, and each switch will operate separately. ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions