...need the 5 port Switch and that you have Wireless Access Points or maybe your Router is a Wireless Router. Next, you have to connect your 5 port Switch to your Router LAN port. Next you need a ...
Question about EtherFast 10/100 16-Port Workgroup Switch [ EZXS16W ] (104834)
I'm trying to get my modem connected to the work group switch linksys. I can't get internet you might need a router instead of a switch. what is the model number of the modem?
Question about SRW2008P 8-Port Gigabit Ethernet Switch (00745883571024)
...the managable ip address, after that i cant access the switch.so i need to cahnge the ip address. hmm.. router? try to check the router if it has an reset switch then press it with in 5-10
...need to go from the leased line to the ROUTER first. The switch you said was unmanaged...so as far as I can tell there is NO IP for the DLINK. If that's the case your router needs to be before the ...
Question about ProConnect KVM2KIT 2-port KVM Switch
need the toggle keys to switch between the 2 desktop PC that I connected. Scroll lock + scroll lock Should fix your problem.... In my case, my logitech keyboards don't have a scroll lock...which kinda
Question about 8-Port (SD208) 8x10/100 Mbps Networking Switch
...You'll need the admin password. If it's just a switch, then you can just plug in; however, I strongly advise putting a router in between a modem and switch. You want to have a firewall in
Question about EtherFast EZXS55W 5x10/100 Mbps Networking Switch
...switch. You need an actual router to be able to open ports. The switch itself is not routing anything, just acting as a switch. You will probably need to connect a router to be able to open/forward ...
Question about SR2024 24-Port Gigabit Ethernet Switch (S2798533)
...about it. If your vocie quality suffers, you may need to, but i dont usually worry until around 20 phones. If you do need to set up a Vlan and enable qos, you are going to need to upgrade your
...Switch. Need to find out exactly how to use QOS and block particular ports either block all ports except port 80. Looking forward to hear from you soon. blocking ports and QoS is a layer 3 function, ...
...in mtnl switch Port mirroring is not supported on unmanaged consumer grade switches. You either need a managed ethernet switch or a 10/100 unmanaged hub which will do what you need out of the
Usually answered in minutes!
3,968 Questions
1,852 Questions
952 Questions
689 Questions
416 Questions