Questions & Answers for: Hyundai need switch

Question about 2000 Sonata

1 Answer

switch? It looks as though I only need to remove the center dash paneling / facia (wood grain plastic) to get to the switch and pull a few connected wires. If anyone can confirm this I'd appreciate it

Ad

Question about 2000 Sonata

1 Answer

...switch tumed on. If you need to accelerate rapidly, press the accelerator pedal all the way to the floor. The transaxle will automatically shift to a lower gear, depending on the vehicle speed and ...

Ad

Question about 2003 Accent

1 Answer

...need to have the system serviced, but replacing the switch your self can be done like changing a spark plug. Just make sure your fast so you don't loose that much R134a and keep your cost of the ...

...need to check the headlight switch for a ground worse case you may need to pull the dash to see if you have a falulty bulb circut to the dash lights check all wires from the head light switch and ...

...Switch. The nuts need to be loosened. The Switch in your case will need to be unscrewed out of the bracket moving the Plunger away from the Brake Pedal Arm. In some cases this Plunger is already all ...

Question about 2000 Accent

1 Answer

...switch you need a test light or digital volt meter to check to see if power going to power window motor.if power going to power window motor, either window binding or power window motor faulty. make ...

...,no fuses blown ! Want to replace complete switch assembly , just need removal process procedure ! Thank u Mike Ford it could be your transmisssion is not reading in park pos. have you looked at

...need a 2008 Hyundai Sonata switch Wrench. But seriously, all joking aside... If you would like somebody here on this forum to assist you, please provide more specific details. Like - what switch are ...

...switch or need to have the switch properly adjusted No ! That means you need a new brake light switch . Under the dash on top of the brake pedal is where the switch is . Brake lights dont turn ...

...or if there is a problem with the wiring. If the switch is stuck, you can try to gently pry it loose with a small flathead screwdriver. If that doesn't work, you may need to replace the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 Hyundai Santa Fe
2004 Hyundai Santa Fe

1,503 Questions

2001 Hyundai Elantra
2001 Hyundai Elantra

1,180 Questions

2000 Hyundai Accent
2000 Hyundai Accent

1,131 Questions

2006 Hyundai Sonata
2006 Hyundai Sonata

1,254 Questions

2001 Hyundai Accent
2001 Hyundai Accent

1,082 Questions

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...