Questions & Answers for: Alesis need switch

...for your help in this. Hi Mate, This seems to be a common problem now, go here looks like you need a new capacitor or two, possibly a resistor aswell depending. ...

...hot, i think the driver is ok but as soon as i switch it on it bgins to hum You need to take a closer look really, see if anything on the power supply board inside has melted, burned, popped,

need foot switch for this machine. I need a foot switch for Alesis sr-16 drum machine. I emailed Alesis; no reply. Any suggestions? What you need is 2 unlatched switches 1 for the stop start function ...

...it run all day and it won't burn a cd. I eventually have to abort. Either the HD is bad or you will need to reinstall the O.S. /firmware. the firmware is avail on the alesis site try the O.S first. ...

...switch wont work SR 18 If you are using the proper footswitch try testing it by connecting the probes of a volt ohm meter to the plug tip and base. Using the resistance measurement push down on the ...

...switch button. I urgently need help. I'm from Singapore and I bought the machine from Sinemax Singapore. I do not want to send the machine for repair until i get advice from the experts. Your kind ...

I have Alesis 18. It makes a crackling noise when switched on TURN THE VOLUME DOWN AND TRY MOVING IT AROUND IN DIFFERNT DIRECTIONS., OR YOU MAY NEED A NEW SWITCH.

...help........? Thanks Jamie Generally a blown fuse is an indication that something is wrong and needs to be fixed. If it is happening while the unit is in use, it may indicate power leakage to ...

...CANNOT use one of those universal adapters, period. The DM5 Alesis takes an AC output adapter. You need 9 VAC at 830ma or more. AC output adapters are hard to find and you are not the first to try a ...

...pad (or pad group) turned up? (On a Roland module, where the pad is AUX1 to 4 - the 'fader' button needs to be pressed in order to operate the AUX slider). The next couple of things are less likely, ...