Questions & Answers for: need switch

Ad

Question about 5225WSP Switch and Outlet

1 Answer

switch using 12-2 romex? Only if you have two separate 12/2 lines. You need 12/3 w ground, because this is needed to connect the two switches and carry the neutral. You can start with 12/2 power going

Ad

Question about 1451-2ACP Grounded Quiet Switch

1 Answer

...switch in my bathroom. I need to replace the light switch in my bathroom. The faceplate is metal, and the switch doesn't show a grounding screw (leviton 01451-W). The replacement switch I found has a ...

Ad

Question about Lighted Switch

1 Answer

need to use a four-way switch if you are wiring three or more switches together to control the same light. In the case of three switches, only the middle one needs to be a four-way, with the first and

...turn it on, or when the the pressure switch does, or when both switches are on. But it won't turn itself off. If you want to disable the pressure switch, you will need to take it out of the

Question about Inc. ST01C Digital In-Wall Timer

1 Answer

...switch, all you need are two wires from replaced switch plus a neutral wire. Open following link for detailed wiring instructions and online manual. ...

Question about 2005 Cobalt

1 Answer

...switch you may need to turn the key a little while pulling off the switch  assemble opposite way they you will need learn the new switch to the system you will need to cycle the switch to crank ...

Question about FAN CONTROL SWITCH

1 Answer

...switch and timers.Some timers need a neutral wire, while others, such as spring-wound timers do not need neutral wire: each of these items is wired separately.Copy following link for switch ...

switch i need to replace switch cause when i turn off switch parking lights remain on have to switch on and off again. so please let me know how i can change switch To change a light switch, you first

Question about Decora Gray Rocker 4-Way AC Quiet Switch

1 Answer

...need a 2-wire coming from power source, 3-wire from first switch to 4-way switch then 3-wire to last switch. white wires (neutral) get connected together. Depending on the layout of the switches. i.e ...

...switch as separate switches for each light. I'd need to use on live feed for both lights. Here is a double wall switch. Power into switch as with any switch, and each switch will operate separately. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Electrical Supplies Experts

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Gene Haynes

Level 3 Expert

5353 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you an Electrical Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...