Question about WRT54GX2 Wireless-G Broadband Router with SRX200 (LS-WRT54G2)
reset button is located at the base of the router you may need to turn one of the base stand if you are not able to locate After resetting you need to reconfigure the router with new security settings
...need to reset it To reset your WRT54G2 router, locate the reset button at the left side of the rear of the router. Press and hold this button for 30 seconds. This will reset the router to factory ...
Question about WRT350N Wireless Router
need to reset the router and reconfigure it . There is a small reset button on the router. Press and hold it for 30 seconds. Remember if you reset the router, you will lose all the router settings and
...need to reset the password in my Linksys WRT55AG, how Ido, please? you need to reset the whole system for you to be able to reset the password,there is a button at the back of it where you can insert ...
Question about RangePlus WRT100 Wireless Router
...instructions to set up the router. To reset that, the device needs to be reset for 30 seconds by pressing the reset button at the back.. Also, after you reset the device, you need to install it
need to reset router Hi Friend, In order to reset the router, you will find a small pin point hole on the back of the router. Take a paper clip or a pen and press and hold the red color reset button ...
need to reset to factory settings Try this hard reset method: With the unit powered on, press and hold the reset button on back of unit for 30 seconds Without releasing the reset button, unplug the ...
...need paper clip to go into the hole and push the reset button, this will reset the unit back to factory settings, then you will be able to reset your password and start fresh. Remember to use a word ...
...side of Linksys router. You need to press that button.Remember if you reset the router, it will come back to factory default settings and you will need to reconfigure it.See How to reset Linksys ...
need to hold the reset button for about 15 seconds. Make sure you have solid contact with the button, such as with a paper clip or tooth pick. If it still will not reset then you may have a bad router
Usually answered in minutes!
952 Questions
299 Questions
248 Questions
219 Questions
206 Questions