Questions & Answers for: need front end alignment rack

...need the front end aligned. If problem is in the rear you may need a four wheel alignment. If it was low air pressure it would wear the inside and outside edges of the tires. This is a common problem ...

Ad

gear apart, or just simply, how do I do it. I have a 2006 Toyota camery You need to remove the outer tie-rod end. After the boot is replaced. it would be prudent to get the front end alignment checked

Ad

...is hard to turn on my chevy equinox 1st check the PS fluid level, if that is ok you have a defective rack and pinion steering gear, u will need to have it replaced and then the front end

...do-it-yourself project. Check around for prices. You will need to get the front end aligned after this is replaced also. I assume the car has high miles and that the rack has not been replaced

...and leave a note wich line goes were.) next just unbolt tghe rack and slip it out of the wheel well. difficult without a hoist and will need a front end alignment find good description at autozone ...

...in your front end. You need to take the car to an alignment shop and have it checked over. You could be looking at repalceing ball joints, tie rod ends, struts or even control arms. Hope this

Question about 2001 Focus

1 Answer

...front wheels to face slightly outward. Any help appreciated u need to adjust the tie rods when u removed the old one u should have tken measurements for the distance that the components [center of ...

...need to be done want to have done at same time since its close to rack and pinion. should links be included in the labor charge if i have my own part for links? i got quoted prior to rack and pinion ...

Question about 2004 Explorer Sport Trac

1 Answer

...need to take the truck to a shop for a front end alignment after you are done. If you think that you have the skills to handle this job, I would suggest you watch the videos I've linked. FYI, it will ...

...will it take? Will my car need to be recalibrated afterwards? If you are talking about the rack-and-pinion, yes it is fairly complicated. Check YouTube. You will need a front end alignment

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...