...off, press and hold the power button on the unit until the word BOOT appears on the display. 4. Wait until the unit reboots and shows the clock again, then power the TV and the DVR up. 5. Choose the ...
Question about Sharp Office Equipment & Supplies
off so we don't hear the fax go through? There's a Key Operator setting for muting the fax speaker. Press the 'system settings' button, then the Key Operator button to enter the access code to the key
Question about Aquos LC-52SE94U 52 in. LCD HDTV
...off. I have no sound. mute button on both remotes ( tv & cable) is off. think has something to do with Shaw cable box? Can't find any audio setup? Was trying to get closed caption which is a ...
Question about 55R-WP4H 55" Rear Projection Television
MUTE. This seems to work for some sets. Also, the right cursor arrow also acts as the ENTER button, so try it if you’re having difficulty with the ENTER button. To exit the service menu, hit press the
Question about Aquos LC-46D62U 46 in. LCD HDTV
...mute the tv or turn it on or off with the remote. The IR-Infra Red sensor could be bad. Pretty cheap part. try shopjimmy or partstore. And well the obvious, are the batts good... Hope this
...i don't have the remote and i had shut the speakers off to use with surround amp but now want to use it with internal speakers HelloTo turn OFF mute function, you must have its remote
Question about Aquos LC-32D40U Television
muted my sharp le 810 and now i can't retrieve the sound muted tv with dish remote . on dish remote tryed to go back to sound.nothing! so i tried my sharp remote and stilll no volume!? If you push
no audio on my sharp aquos sound was working i turned it off with the mute button on and no so sound check to make sure the speakers in the set did not get set to OFF.
...Off Auto Mute How can I stop my Sharp LC-52SB55U TV from turning the sound off if I leave it Muted too long.....Disable Mute Timer Did you try unplugging the television? It may reset if it is ...
Off:** Use the "Power" button. 2. **Changing Channels:** Use "Channel Up" and "Channel Down." 3. **Adjusting Volume:** Use "Volume Up" and "Volume Down." 4. **Input Selection:** Use "Input" or "Source
Usually answered in minutes!
40 Questions
32 Questions
10 Questions
18 Questions