cover to change out the seal. This is how you do it: 1. Drain all oil from the engine (best to do it when it needs it) 2. Remove the shifter (one bolt, then just wiggle it out) 3. Remove the old seal
...cover underneath the radiator in the front of the motor. Put a 17 mm socket on an extension with a breaker bar in the front hole and turn the motor over manually until the top dead center (TDC) mark ...
...cover. remove the spark plug caps and valve covers. Put 17mm socket into the front of the motor and rotate the crankshaft counter clockwise and align the "TL" mark on the rotor with the pulsar index ...
...motor gently on the radiator, remove the rear cover,and address the spring/shift actuator issue in the bottom left corner of the motor. Aligning the shift actuator gears is critical. Be sure to slide ...
Usually answered in minutes!
43 Questions
34 Questions
14 Questions
9 Questions
4 Questions
