Questions & Answers for: motor belt Cars & Trucks

...belt around the motor mount I have a new serp belt and I have been told that I do not need to remove the motor mount the car is a 1996 buick LeSabre with a 3800 K ( L36 )series motor. Is there a way ...

...belt replacement. does motor mount 94 saab 900 v6 serp belt replacement. does motor mount need to come off? Yes, the motor mount must come off to replace the serpentine belt on the 3.0 6 cylinder ...

...shaft belt damage the motor or will replaceing the belt fix the noise? You sould replace the belt along with the timing belt. If it gets caught in the timing belt you will have MAJOR EGINE

...Belt Motor Door switch Belt Dryers have a drive belt that turns the clothes drum. If the belt breaks, the drum stops rotating. Then you need to replace the belt, and often the idler pulley, because ...

...and a piece of wood on the oil pan to support the motor so you can remove the motor mount to remove the belt. Again, this is on SOME gm motors not all. On the others the mount isn't in the way at

...belt? If the blower motor is not working, it could be a fuse, or the motor itself is bad, or the wiring to the motor has become discontinuous. Also a relay could be bad. The most likely things to ...

...belt broke the motor is trashed. Interference fit means that pistons can hit valves if the belt breaks. That is why they tell you to replace the timing belt before too long. Also if motor is ...

...belt ? Your motor should have an automatic tension regulator.  If you're trying to fix belt squeal, you can try spraying the inside and outside of the belt with WD-40 while the motor is ...

...belt without replacing both motor and the belt? Your very confused The door window & the engines serpentine belt & whatever motor your taking about-- are two separate things Start ...

belt. Tighten the motor mounting bolts. Reinstall the back panel. Plug in the washing machine and turn on the water supply. Note that the specific steps may vary slightly depending on the model of the