...belt that connects the motor to the fan slips. If the blower is making a grinding noise, shut off the unit and call a heat pump repair technician --the motor's bearings are probably shot. In most ...
...belt. Hold the motor in place and tighten the mounting nut. Make sure you don't tighten the belt too much or it will break. You should be able to press on it and feel it give just slightly. Replace ...
...motor shaft.Install new belt around large and small pulleys (# 3L160 - 3/8 " X 16" V-Belt sold by Gates, Dayton, etc. I purchased my belt from the local Ace Hardware store for about $6) while ...
...BELT, MOTOR AND BEARINGS- EXPENSIVE! If it turns out to be the motor, it is false economy to just have the brushes changed although financially very attractive. Experience of others is that the ...
...BE USED TO TENSION THE BELT. THAT COULD LEAD TO DAMAGE TO THE BELT, MOTOR AND BEARINGS- EXPENSIVE! If this has assisted you please consider a 4 thumbs up for the rating. Thanks and good luck! John ...
...If not there is spring which could have jumped and so the belt which is free over the motor does not rotate the tub. So look for a hook or spring on the sides and pull it to give tension to the
...motor that actually makes the belt spin and the drum turn. The motor will have electrical wiring attached that you shouldn't touch. The other pulley is called a tensioner pulley and should be spring ...
...Belt should go around entire drum then around motor pulley (which is metal) and tensioner/safety pulley (which is the white pulley) first belts are not as easy as they appear. But beside the belt the ...
Question about HLP21N Washer
...belt. There is occasionally a slight nudge in the motor but otherwise no motion. There is a subtle smell of burning. The belt looks fine. The lid switch seems ok since it responds to both opening and ...
...motor coupling is broken, replace it. Parts Cause 3Drive Belt Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. ...
Usually answered in minutes!
185 Questions
75 Questions
71 Questions
75 Questions
36 Questions