Questions & Answers for: Lexmark 6 l motor

I have a Lexmark C510 which display a 910 service engine motor. Can you tell me what motor this is? 910?Developer motor service check Step Questions / actions Yes No 1 Are there any unusual noises ...

...993: Indicates the cam sensor has not been activated. The sensor activates when the fuser drive motor turns the cam disk. If the fuser drive motor does not turn on, or the drive parts are not ...

where can i get wheelwriter carrier motor I have never had a carrier motor go bad. The older ones have the plastic gears crack. The newer ones respond very well to a little WD40 on the bearings ...

code 911 is showing in the window 911 error is caused by a not rotating main motor. Turn printer off and removeright cover. Open top cover and override top cover interlock switch. Restart printer and ...

motor error on lexmark printer c540 150.07 service comes up along with the "motor error" I have unplugged and turned machine off. What does the motor error mean? Motor error comes up when motor of the

My W840 message : 9.12.00 Service Motor Error The PC (photo conductor) cartridge motor does not rotate at the specified speed. Check the PC cartridge for installation. Is the PC cartridge installed ...

el motor se mueve mu cho y tira esplosine po el mofle I don't speak spanish but I think that you are saying something about a carrier motor, they do get noisy and change margins. Remove the case, ...

check toner cartridge 200.16 The error 200.16 on a Lexmark X644E indicates that the main drive motor is not working due to high mechanical load due to paper jam or bind. The recommended actions ...

knocking noise when printing Check the following: 1. DC motor assembly. Make sure all the motor plate mounting screws are tight. 2. Idler pulley - DC motor assembly. Make sure the idler pulley is not ...

...can l fix scanner cable missing problem? X646e - 298.02 Scanner cable missing The ICC card and/or Motor Driver Card has failed. ICC - 40X0485 Motor Driver Card - 40X0486 ICC is located in the rear ...