Questions & Answers for: mono sound

...in mono thus no sound tv is stuck in mono thus no sound does this monitor have a sound cable connector? check the cable connections and see if it goes to the sound output on the back of the ...

mono/stereo sound My akai 37 inch t.v. never sounds right. It always switches from mono/stereo sound and it never stays stable in one spot. I place the setting on "surround and that sometimes helps ...

...Sound like you have a Mono jack output you can try some headset models that can be used Mono or Stereo. ...

...mono block how do i get the most sound? without overloadin my amp? Hi mate very nice amp you got there here is the specs for it Model: MA Audio HK401SX Hard Kore Series 1800 Watt 1 Channel High ...

...to 1/4" stereo male plug adapter. The adapter will split the mono signal into a stereo signal, you will not get a true stereo sound because the sound will be the same on both left and right

does not stay connected. You are using stereo headset, but it is a mono output. So you need either mono headset or an adapter that will allow the mono sound to go to stereo output for a stereo headset

...sound unless the mono button is pressed. Mono sounds fine but is not stereo. When in stereo FM it sometimes flashes back and fore to mono or becomes silent. The CD player works fine. I understand ...

mono sound signal. ch 1 +2 +4 CH3 out mono and mono out. so only 2 channels. xover P1. what is the solution? sounds like your bridging your outputs. try running each channel individually first. report

...sound works on camcorder without the wireless. you need to use a mono-to-stereo cable, the azden is a mono output mic by the aiptek is a stereo input and you are shorting out the phantom power with a ...

...cable....as long as you're panned to center on your channel strip, you would have full mono sound out...ie sound equally from both speakers. Usually you would be running your board in mono